Kenco Engineering

Level Switches

Whether you are looking for electronic or pneumatic level switch control then you can be sure that Kenco have a product that suits your requirements.

• Ultrasonic Liquid Level Switches are used in a wide variety of applications to detect the location of level in a process or storage vessel. These switches can be used in virtually any liquid.
• Thermal Differential Switches are designed for a wide range of flow and level applications. These switches can be used to direct either the overall liquid level or a liquid-liquid interface. They can also be used to detect a specific flow rate or flow/no flow condition in liquids and gasses.
• Electronic Float Switch uses a float to determine the presence or absence of liquid in a vessel at the process connection. The float arm assembly consists of a float at one end and a magnet at the other. As the level in the vessel rises, the float rises and the magnet falls. The magnet actuates a second magnet on the other side of the pressure boundary. This second magnet causes the switch to change state. Simple Installation – Switch can be easily installed at the process connection in the vessel wall with simple hand tools
• Pnuematic Float Switches use a float to determine the presence or absence of liquid in a vessel at the process connection. The float arm assembly consists of a float at one end and a magnet at the other. As the level in the vessel rises, the float rises and the magnet falls. The magnet actuates a second magnet on the other side of the pressure boundary. This second magnet is the reactive component in the snap acting switch that opens and closes the pneumatic valve. Pnuematic float switches can be designed to function as either a pneumatic high or low switch or as an automatic water make-up valve.

Level Measurement

If it is simple level measurement you are looking we are sure that Kenco Engineering will have a product that suits your requirements.

• Magnetic Level Gauges are used to determine the volume of liquid contained within a tank. This eliminates the need for glass meaning high pressure applications and hazardous locations are protected from the danger of a chemical spill due to glass failure.
• The in-tank liquid level transmitter is a continuous multi-functional Magnetostrictive transmitter that provides product level, interface level, and temperature to the user via Analog (4-20mA) with HART®, Modbus RTU (Remote Terminal Unit) or DDA (Direct Digital Access). Magnetostrictive technology is one of the most accurate and repeatable level technologies available to date. Once the transmitter is installed and calibrated, there is no requirement for scheduled maintenance or recalibration.
• Mechanical Level Gauges are an ideal choice in tank level measurement for quality, durability and reliability. When only visual level indication is required, Kenco has an affordable solution to meet requirements and offer a comprehensive range of mechanical level measurement products.
  (i) A wide variety of gauge styles available to meet your piping requirements(ii) Armoured Tubular Glass Level Gauges suitable for low to medium pressure applications
  (iii) Armoured Flat Glass Level Gauges (Reflex / Transparent / Weldpad) suitable for medium to high pressure applications
  (iv) Simplified designs for ease of installation and maintenance

Sight Flow Indicators and Sight Windows

The KENCO Engineering Company offers a variety of Standard KSF (cast body), Full View and Armoured Sight Flow Indicators, as well as, a complete line of Sight Windows.

Sight Flow Indicators provide a window into piping. These products offer a cost effective and efficient way to visually monitor the flow of fluids, and to determine if any problems areas exist along a process piping system. These devices allow operators to observe flow rate, direction, colour and clarity of the fluid traveling through the process piping.

KSF Sight Flow Indicators feature a cast body design and is ideal for applications where there is higher temperature and pressure. They are available with a variety of internal mechanical indicator options that enhance visual indication of the fluid in the process.

FVSF Full View Sight Flow Indicators offer the maximum viewing area of all types of sight flow indicators and allow for a 360° view of the fluid being observed in a pipeline.

ASF Armoured Sight Flow Indicators offer the best mix between visibility and protection. The additional sight tube shielding provides protection, while still maintaining maximum visibility.

Sight Windows are used to provide direct reading of process liquids. They can be mounted directly to a vessel wall, or to pipe, in a variety of configurations.

Industries Served:

• Onshore and Offshore Oil and Gas Production
• Chemical and Petrochemical Industries
• Food and Beverage Processing
• Pharmaceutical Processing
• Water and Wastewater Treatment
• Fluid Processing